Study on the lifetime and attenuation properties of microbubbles coated with carboxylic acid salts

Four kinds of surfactants, sodium laurate, sodium myristate, sodium palmitate and sodium oleate were used to study the effects of surfactant coatings on the lifetime and attenuation of microbubbles. The changes in the size distribution of microbubbles prepared with these surfactants in saline were measured with a Coulter Multisizer (Coulter Electronics Ltd., Luton, UK). Frequency characteristics of ultrasonic attenuation of the microbubble suspensions were measured between 400 kHz and 6 MHz. From the changes in attenuation in the microbubble suspensions over time, it was found that the lifetime of microbubbles in a suspension also depends on the frequency of the irradiating ultrasound. The effect of surfactants on the frequency characteristics of attenuation was also studied, and characteristics of the surfactant coating, including shell elasticity and shell friction parameters were calculated from the measurement results. Microbubbles produced with sodium palmitate had the longest lifetime and the smallest average size. The shell had very little effect on the ultrasonic properties of microbubbles produced with sodium palmitate, suggesting that the sodium palmitate microbubbles behaved ultrasonically as free microbubbles.     

晶界内耗的研究

晶界内耗是中国科学家葛庭燧开创的一个研究领域．以往晶界内耗的研究主要是用多晶试样进行的．最近作者用不同取向差的双晶试样研究了单个晶界的内耗，取得了一些新的结果．文章综述了研究晶界内耗的意义以及新近的进展．     

筒仓效应观测仪的设计及其应用

设计并制作了观测静态颗粒物质筒仓效应的实验系统,应用该装置研究了筒仓效应的尺寸依赖性.实验结果表明:圆柱形容器中的颗粒物质对于容器底部的饱和压力依赖于容器直径的3次方,而改变填入颗粒的直径时则饱和压力并无明显改变.     

石墨颗粒/CuAlMn形状记忆合金复合材料中的位错内耗峰

利用渗流技术制备出了以石墨颗粒为阻尼增强相、以Cu-11.9Al-2.5Mn(wt%)形状记忆合金为基体的复合材料，对该合金的内耗行为进行了研究. 在淬火态样品的内耗-温度曲线上观察到两个内耗峰，分别位于240 ℃和370 ℃附近. 对其中低温峰的变化规律和机理进行了研究. 实验发现，低温峰仅在复合材料中出现，峰位与频率无关，峰高随频率升高而上升；随升温速率增加，峰高增加，峰位移向高温；随石墨颗粒体积分数增加，峰高增加；经多次热循环后该内耗峰消失. 由以上特征和微观观察，可以证明该峰起因于外加交变应力与位错的相互作用.     

A study on shielding gas contamination in laser welding of non-ferrous alloys

Laser welding of non-ferrous alloys is a high-productivity and cost-effective joining technology, which gained an undoubted interest especially in aerospace, chemical and medical industry, where high strength and corrosion resistant mechanical parts are required. Unfortunately some of the most used non-ferrous alloys are highly reactive with respect to the components of the environmental atmosphere: oxygen, nitrogen, hydrogen and humidity. This reactivity leads to the formation of porosities and to oxides and nitrides inclusion, which are responsible for a decrease of ductility and strength in welded joints.According to this a good shielding technique of the weld pool is of primary importance in order to obtain sound beads and reliable manufacturings. This paper deals with the opportunity of simulating the shielding gas behavior by means of Computational Fluid Dynamics software in order to understand the relationship among the outlet position, the shielding gas type and its flow rate.A simulation activity was carried out in order to evaluate the behavior of shielding gas concentration surrounding the weld pool. The simulated welding environment was simplified without considering the presence and the effect of the plasma plume. The main results concern the shielding gas contamination prediction with respect to the distance from the beam-material interaction zone.     

Dissimilar autogenous full penetration welding of superalloy K418 and 42CrMo steel by a high power CW Nd:YAG laser

Experiments of autogenous laser full penetration welding between dissimilar cast Ni-based superalloy K418 and alloy steel 42CrMo flat plates with 3.5 mm thickness were conducted using a 3 kW continuous wave (CW) Nd:YAG laser. The influences of laser welding velocity, flow rate of side-blow shielding gas, defocusing distance were investigated. Microstructure of the welded seam was characterized by optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). Mechanical properties of the welded seam were evaluated by microhardness and tensile strength testing. Results show that high quality full penetration laser-welded joint can be obtained by optimizing the welding velocity, flow rate of shielding gas and defocusing distance. The laser-welded seam have non-equilibrium solidified microstructures consisting of γ-FeCr_0.29Ni_0.16C_0.06 austenite solid solution dendrites as the dominant and very small amount of super-fine dispersed Ni₃Al γ′ phase and Laves particles as well as MC needle-like carbides distributed in the interdendritic regions. Although the microhardness of the laser-welded seam was lower than that of the base metal, the strength of the joint was equal to that of the base metal and the fracture mechanism showed fine ductility.     

Nonlinear mobility of a driven system: Temperature and disorder effects

We consider the dissipative nonlinear dynamics of a model of interacting atoms driven over a substrate potential. The substrate parameters can be suitably tuned in order to introduce disorder effects starting from two geometrically opposed ideal cases: commensurate and incommensurate interfaces. The role of temperature is also investigated through the inclusion of a stochastic force via a Langevin molecular dynamics approach. Here, we focus on the most interesting tribological case of underdamped sliding dynamics. For different values of the chain stiffness, we evaluate the static friction threshold and consider the depinning transition mechanisms as a function of the applied driving force. As experimentally observed in QCM frictional measurements of adsorbed layers, we find that disorder operates differently depending on the starting geometrical configuration. For commensurate interfaces, randomness lowers considerably the chain depinning threshold. On the contrary, for incommensurate mating contacts, disorder favors static pinning destroying the possible frictionless (superlubric) sliding states. Interestingly, thermal and disorder effects strongly influence also the occurrence of parametric resonances inside the chain, capable of converting the kinetic energy of the center-of-mass motion into internal vibrational excitations. We comment on the nature of the different dynamical states and hysteresis (due to system bi-stability) observed at different increasing and decreasing strengths of the external force.     

Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels

The technique to weld AISI 304 stainless steel to AISI 420 stainless steel with a pulsed Nd:YAG laser has been investigated. The main objective of this study was to determine the influence of the laser beam position, with respect to the joint, on weld characteristics. Specimens were welded with the laser beam incident on the joint and moved 0.1 and 0.2 mm on either side of the joint. The joints were examined in an optical microscope for cracks, pores and to determine the weld geometry. The microstructure of the weld and the heat affected zones were observed in a scanning electron microscope. An energy dispersive spectrometer, coupled to the scanning electron microscope, was used to determine variations in (weight %) the main chemical elements across the fillet weld. Vickers microhardness testing and tensile testing were carried out to determine the mechanical properties of the weld. The results of the various tests and examinations enabled definition of the best position for the incident laser beam with respect to the joint, for welding together the two stainless steels.     

Jet impingement onto a tapered hole: Influence of jet velocity and hole wall velocities on heat transfer and skin friction

Jet impingement onto a hole with elevated wall temperature can be associated with the high‐temperature thermal drilling, where the gas jet is used for shielding the hole wall from the high‐temperature oxidation reactions as observed in the case of laser drilling. In laser processing, the molten flow from the hole wall occurs; and in the model study, the hole wall velocity resembling the molten flow should be accounted for. In the present study, gas jet impingement onto tapered hole with elevated temperature is considered and the heat transfer rates as well as skin friction at the hole wall surface are predicted. The velocity of molten flow from the hole wall determined from the previous study is adopted in the simulations and the effect of hole wall velocity on the heat transfer rates and skin friction is also examined. It is found that the Nusselt number and skin friction at the hole wall in the regions of hole inlet and exit attain high values. The influence of hole wall velocity on the Nusselt number and skin friction is found not to be very significant. Copyright © 2008 John Wiley & Sons, Ltd.     

测量和减小纳米凹凸面摩擦力的分子新技术

报道了美国用原子力显微镜可直接检测超微型设备内发动机转子与外表表面上凸点之间摩擦力的大小的研究成果，介绍了降低了时机的摩擦力的方法。